Tel: +86-371-68085488

Aluminum Sheet
Aluminum Plate
Aluminum Coil
Aluminum Circle
Polished Aluminum Mirror Sheet
Aluminum Foil
Aluminum Tread Plate
Embossed Aluminum Sheet
Coated Aluminum Coil/Panel(PVDF/Polyester)
Copper and Aluminum Composite Sheet/Coil
Aluminum Perforated Panel
Anodising Aluminum Sheet/ Coil
Special Aluminum Products
Aluminum Stocks
Industry News

5A05 aluminum Features and Applications


5A05 Al-Mg system for anti-rust aluminum alloy, non-heat strengthened. Good weld ability, corrosion resistance alloys can still apply to welding, atomic hydrogen welding, gas welding, welding. Its mach inability, the annealed state is poor, half-cold hardening state is still good.


5A05 alloy commonly used for manufacturing processes require high ductility, corrosion resistance, withstand moderate load of welded pipes, welded mailboxes and other liquid containers, as well as other parts; wire used for welding and rivets, rivet requires anodized. In other countries, the approximate alloys (such as 5456) for the production of armor plates, high-strength structural parts. Storage tanks, pressure vessels, and marine supplies, such as missing

Mechanical properties:


Tensile strength σb (MPa): 225

Conditions yield strength σ0.2 (MPa): 110

Elongation δ10 (%): 15

Note: The vertical pipe at room temperature mechanical properties

Sample Size: All Thickness


Heat treatment:


1) Homogenization: Heat 460 ~ 475 ; holding 12 ~ 14h; air cooling.

2) Rapid thermal annealing: heating 310 ~ 350 ; holding time 30 ~ 120min; air or water.

3) High temperature annealing: heating 310 ~ 335 ; finished thickness 6mm or <6mm, the holding time of 30 ~ 180min or 30 ~ 120min; air cooling.

4) Low-temperature annealing: heating 250 ~ 300 or 150 ~ 180 ; holding time of 1 ~ 2h or air-cooled 2 ~ 3h Status: aluminum and aluminum alloy extruded seamless pipe (H112 condition)


Pre:Mechanical Properties of Aluminum Alloy 5A06

Next:Typical Uses 3000 Series Aluminum Allo